Che cos'è la spina e presa di tipo K (Presa)?

The Danish standard type K plug is unique to Denmark. Unlike the similar type E plug, the grounding pin is not mounted in the receptacle but is on the plug itself. to the Type C “Euro plug,” except it has an earth pin off to one side.

What is a Type K plug?

The electrical Type K plug has two round pins and a spade grounding pin. It is similar to the Type E electrical plug but has an earth pin rather than an earth hole on the pin and an earth hole rather than an earth pin on the socket.

Type K plug features

The Danish standard is described in DS 60884-2-D1. Unlike the similar type E plug, the grounding pin is not mounted in the receptacle but is on the plug itself.

The U-shaped earthing pin is 14 mm di lunghezza, 4 mm thick, e 6.5 mm in diameter. The line and the neutral pins of type K are round and have a 4.8 mm diameter. They are 19 mm di lunghezza, and their centers are spaced 19 mm di distanza. La distanza da centro a centro tra il pin di massa e il centro della linea immaginaria che collega i due pin di alimentazione è 13 mm. The plug is rated at 16 UN, and a spina di tipo C fits perfectly into a type K socket.

The Danish socket will also accept plug types E and F: however, there is no grounding connection with these plugs because a male ground pin is required on the plug. Because of the huge amount of imported European appliances fitted with E/F plugs, the Danish government decided to make it legal to install type E or F sockets too.

Così, the expectation is that, in the long term, the standard European type F socket (or – but this is less likely – the less frequently used type E) will eventually replace the Danish type K socket.ected to the mains with an appropriate high power industrial connector.

What countries use type K plug?

Type K is used almost exclusively in Denmark and Greenland.

Usato nei paesi:

Information on The Type K Electrical Outlet

Technically known as the Danish 10 A/250 V, this plug is the Danish standard plug. The Danish Type K socket will also accept Type C and Type F. Though Type E plugs will also fit into the socket, it should not be used for appliances that need to be earthed.

A variation of the Danish plug, the standard DK 2-5a, also exists for surge-protected computer circuits. It fits into the corresponding socket and the standard Type K, but the standard Type K plugs do not fit into the special Type K computer socket by design.

Nel passato, Danish sockets were equipped with a switch to prevent the live pins from touching when connecting or disconnecting the plug. In data odierna, sockets without switches are allowed, but they are required to have a cavity that prevents the pins from touching.

Tuttavia, the shape of the plugs makes it rare that the live pins will touch. New electronic installations in Denmark are required to have grounded outlets, and older installations don’t have this requirement, but they must be protected by RCD/GFCI (HFI in Danish). Da quando 2008, wall outlets for Type E French plugs have been permitted in Denmark, but sockets for Type F will not.

Type K electrical plug certificate

Organizzazione: DEMKO

The Denmark AFSNIT 107-2-D1 standard 3 polo 13 amp is also referred to as SRAF 1962/DB 16/87. Power cords manufactured in compliance with Denmark AFSNIT 107-2-D1 standards. DEMKO agency approvals and certifications are available on the product specification page.

Abbiamo fatto un'introduzione grafica molto dettagliata nell'articolo segni di sicurezza per ulteriori informazioni sulla certificazione di sicurezza delle spine dei cavi di alimentazione.

Ora è il tuo turno

So that’s how I understand the type K plug and socket.

Ora voglio consegnarlo a te: Attraverso il mio articolo, do you understand Type K electrical plugs and Sockets (Punti vendita)?

Do you have a different point of view with the Type K power plug? O qualsiasi altra domanda?

Fammi sapere lasciando un breve commento qui sotto in questo momento.

Canale Youtube DCpowercord